going into the fall, the weather is getting colder and the air is drier. While installing the floor, read the manufacturer's installation requirements.   
first, ten days prior to flooring installation, prohibition of sprinkling water on the ground.

after the second floor, cement mortar, ventilation for 30 days after you install the flooring. This is to ensure that humidity in accordance with the requirements for installing the floor on the ground. Meanwhile, floor moisture with the moisture in the air will decrease. 
in the process of reducing the moisture content of the floor, the floor will naturally shrink due to wood fiber moisture loss, so the floor of swelling shrinkage phenomena are inevitable, including phenomena such as water rates are too low will cause cracks in the floor directly. Could use a humidifier, slightly tide mops to the internal humidity, reducing wastage of water in the floor. 
in addition, the more sand weather in the autumn in the North, needs regular dusting the floor, usually with a broom or vacuum cleaner to remove dust, often trampling place more diligent about cleaning. Special attention to the Hall and corridors leading to the outside, in order to prevent dust from entering the room, you can place dust mat at the start. 
Note: some businesses to promote "plastic", said installation using flooring adhesives containing formaldehyde, not environmentally friendly. 
actually glue the main objective is to moisture, consumers in the usual cleaning floors is with a damp MOP or cloth and seams between the plate and the plate easier to water or moisture, long-term moisture enters will inevitably affect the life of the floor.